DeoxIT&﹟174; G-Series – Contact Cleaner & Rejuvenator
Part No. GX100L-25C:
Using Perfect-Straw&﹟8482; with Low-Volume Valve

Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT&﹟174; (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from e or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage e with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For , non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N.
INFO: Using DeoxIT&﹟174; Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT&﹟174; D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT&﹟174; dissolves the contamination and protects the surface.
For reference, DeoxIT&﹟174; has approximately 20% cleaning action.

KEY FEATURES:
Improves Conductivity
Deoxidizes, Cleans, Lubricates and Protects
Reduces Intermittent Connections
Reduces Arcing & RFI
Reduces Wear & Abrasion
* Temperature Range, -34 C (-29 F) to +200 C (400 F)